Booster pumps and circulating pumps have different performances as the name implies. They have their own characteristics for obvious differences in terms of installation location, scope of application, operation and control. From the perspective of installation location, the booster pump is generally installed on the inlet pipe; the circulating pump needs to be installed on the return pipe. From t...
The canned motor pump is absolutely leak-free. And the outside air will not be sucked under the negative pressure inside the pump. It is especially suitable for vacuum system operation; at the same time, it is suitable for high pressure, high melting point, high and low temperature media. The canned motor pump is compact in structure, small in size and light in weight; it has no cooling fan, low n...
In order to avoid and reduce the sudden damage of the canned motor pump, canned motor pump needs regular maintenance. Most canned motor pumps can be repaired once a year. The maintenance method of the canned motor pump is: disassemble the canned motor pump, clean up the various parts, and make an apparent inspection on them to see if there are any abnormalities. Then measure the dimensions of the ...
The canned motor pump is a sealless pump. The pump body and the drive motor are sealed in a pressure vessel filled with pumping medium. The pressure vessel is only statically sealed, and a wire set is used to provide a rotating magnetic field and drive the rotor. This structure eliminates the rotary shaft sealing device of the traditional centrifugal pump, so it can be completely leak-free.
The water pump does not run after power supply on, it is called "locking", which is the most common situation of wall-hung boiler water pump. It often occurs after the wall-hung boiler has not been running for a long time. 1. Locate a large screw on the top of the water pump and use a large "one" screw to loosen it. Then use a suitable screw to loosen the inner shaft slowly. After you feel the jam...
AS one of the most famous water circulation pump factory,Shinhoo offers a very flexible standard program of component solutions, including circulator pumps, motors, cables, connectors, control systems, etc. These standard components can be mixed and matched to thousands of different product variants. So in most cases we are able to meet your requirements with standard solution. If our standard sol...
There are mainly four reasons that cause canned motor pump can not pump water 1. Water or air leakage in the pipeline: The nut may not be tightened tightly during installation. If the leakage is not serious, apply cement or cement slurry mixed with asphalt oil on the leaking or leaking place. Serious water leakage must be re-disassembled. 2. The water circulator...
The impeller is an important accessory of the canned pump, and its shape, size, processing technology, etc. have a decisive influence on the performance of the water circulator pump. The function of the impeller is to transfer the energy input from the prime mover to the liquid. There are three main structural forms of water pump impellers: those with front and rear cover plates are called closed ...
IPv6 